Large amount of CNC breakdowns are attributed to fluctuations in voltage and various types of electrical noises like spikes, surges, H.F. noises etc.
Electrical noises are generated due to switching action of breakers, heavy machinery, capacitor switching, induction hardening cranes, welding etc. The use of inverters, DC drives, SMPS, further pollutes the electrical environment, causing severe power quality disturbances to various CNC machines, installed in the plant. Advanced CNC machines demand stringent standards of power quality for their smooth and trouble-free operation.
Input Voltage | 340 - 480 V AC OR 300-480 V AC |
Phase | 3 phase 4 wire |
Frequency | 47 - 53 Hz |
Output Voltage | 380 or 415 V AC or 200 V AC |
Regulation | ±2 % steady state ± 5 % dynamic state |
Rate of correction | Upto 105V/sec |
Cooling | Air-cooled |
Ambient | 0 - 45 degree C 90%R.H. |
Common mode noise rejection | 100 db |
Normal mode noise rejection | 40 db |
Duty | 100% continuous 110% for 60 sec. 200% for 10 sec |
Metering | Digital Voltage, Currents and Frequency |
Protection | Under / over voltage, Overload and short circuit |
Enclosure | IP 23 |
Ratings | 10, 15, 20, 25, 30, 40, 50, 60, 75 100,125, 150,200, 250KVA |